{PI}-based Transmission Power Control for {WirelessHART} Field Devices

Citation:
da Silva, RP, Eckhard D, Müller I, Winter JM, Pereira CE, Netto JC.  2016.  {PI}-based Transmission Power Control for {WirelessHART} Field Devices. 4th {IFAC} Symposium on Telematics Applications. :343–348., Porto Alegre: IFAC

Abstract:

Wireless networks are gaining space in industrial environments due to the low installation costs and low maintenance. Robustness is also one of the main requirements for these systems to be adopted, and, in this context, WirelessHART (WH), ISA SP100.11a, and WIA-PA protocols met these characteristics. In order to provide low maintenance, these protocols must provide reliable radio links while keeping low power consumption to allow battery powered devices. Unfortunately, the standards of these protocols do not impose any RF power modulation technique, which is a form to increase even more the battery endurance of a wireless field device. Instead, RF power levels are fixed and selected by commissioning, and must allow the longest link per device. In this case, devices in closer ranges waste energy during transmissions, as they could save energy by modulating the RF power. This paper presents a RF power modulation technique that employs a proportional-integral controller and allows reduction of energy consumption while keeping the robustness of RF links. A proof of concept of the power modulation technique is implemented and verified showing good results and proving that the proposed controller is feasible. The proposal has the advantage to be fully compatible with the standard.

Notes:

n/a